Sump Pump Replacement Tips
It is important that you remember a sump basin can overflow when it is not properly pumped. This is why having a backup system in place for your sump pump is imperative, otherwise, there will be a sump pump replacement job in your future.
Mistake #1: Allowing debris to get in the pump
To avoid this mistake, make sure your sump pump doesn’t sit on loose silt, small gravel, or any other debris that can be easily sucked into the pump. Instead, use large rocks or gravel so it cannot clog the lines, as this will destroy the motor in your pump.
Mistake #2: Problems with the float switch
A float switch tells the sump pump to stop once the water level has become too low. Because of this, your sump pump does need plenty of space around the float and switch in order for the arm to freely float and sink. If there isn’t enough room or if there is some obstruction in the way, the float will cause the pump to work poorly, which in turn can burn up your motor.
Mistake #3: Errors with the check valve
A sump pump’s check valve creates a barrier that stops water from flowing back into the pump. There must be an arrow situated around the check value indicating which way the valve needs to face. Make sure the arrow is always pointing away from the sump pump.
Mistake #4: Not testing your sump pump
Basically, there are 3 levels of “need” for a sump pump. The first is when the sump pump is running constantly, even when there is no rainfall. Second, is the “ideal” scenario, when your pump isn’t running, just occasionally runs when the need arises, like during heavy rain or storms, and then shuts off. The last is when your pump never runs.
If you need sump pump replacement in the Gaithersburg, MD area, please do not hesitate to call me today at this number (240) 203-7967 for information about my Kapa Plumbing & Drainage Service services, or to make an appointment.
