How to Replace Your Old Sump Pump?
If your sump pump has finally bit the dust, the following tips as provided by Kapa Plumbing & Drainage Service may just prove to be invaluable when it comes to sump pump replacement in an emergency.
Turning off the power
As strange as this may sound, you would be surprised at how many people forget to do this. So before you do any work on your sump pump, remember is to unplug it, in addition to undoing all and any electrical connections to prevent a nasty electric shock.
Buy the same sump pump
If you are unsure of your DIY skills, then replace your sump pump with the same model as the old one, this way you do not have to worry about the compatibility of a new part with the rest of your system. To ensure you get what you need, you should take the old pump with you to the store.
Start by removing your old pump from the drain line by taking off either the clamp or screw fastenings, allow the pump to drain, and make sure you save all the fittings. Take them with you to the store so you can match the old pump to its new one, or at the very least find a comparable model that is the same size and uses the same electric needs.
Testing the new pump with some water
When you have your new pump and have reconnected it to the water outlet and the drain line, make sure you test it to see if it works, and there are no leaks in the system. Simply plug it back in, and test it by pouring some water into the sump pit. Make sure you observe all the fastenings and connections to check that everything is watertight and to avoid any unwanted surprises in the future.
Try some Teflon Tape
To be absolutely certain that all joints are watertight, seal the threads with some pipe joint compound or, some Teflon tape.
In conclusion, if you require sump pump replacement in the Gaithersburg, MD area, please call us today at (240) 203-7967 if you would like to learn about the services and products we can offer you?
